Advertised shares: China Securities Co.Ltd(601066) letter of recommendation for the company's initial public offering and listing on the gem

China Securities Co.Ltd(601066)

about

Jiangyin advertised that auto parts Co., Ltd. issued shares for the first time and was listed on the gem

of

Issuance recommendation

Sponsor

November, 2001

Statement of recommendation institution and recommendation representative

According to the company law of the people's Republic of China, the securities law of the people's Republic of China and other relevant laws and regulations, the relevant provisions of the CSRC and the relevant business rules of Shenzhen Stock Exchange, Jiang Xiao and Fu Xinxiong, the sponsor representatives of the project, are honest, trustworthy, diligent and responsible, and strictly follow the business rules formulated according to law The issuance recommendation letter shall be issued in accordance with the industry practice norms and code of ethics, and the authenticity, accuracy and integrity of the issuance recommendation letter shall be guaranteed.

catalogue

interpretation...... Section 1 basic information of this securities issuance 6 I. The sponsor representative specifically responsible for the recommendation of this securities issuance 6 II. The co sponsors of this securities issuance project and other members of the project team 6 III. basic information of the issuer 7 IV. explanation on whether the recommendation institution has any circumstances that may affect the fair performance of recommendation duties 8 v. internal audit procedures and core opinions of the recommendation institution 8 VI. verification of private investment fund filing by the sponsor Section 2 commitments of the sponsor Section III verification of paid employment of third-party institutions and individuals 12 I. verification of the sponsor's paid employment of a third party and other related acts 12 II. Verification of the issuer's paid employment of a third party and other related acts 12 section IV recommendations for this offering 13 I. the decision-making procedure of the Issuer on this issuance is legal 13 II. This offering complies with relevant laws and regulations 15 III. main risk tips of the issuer 20 IV. evaluation of the development prospect of the issuer 25 v. recommendation conclusion of the recommendation institution on this securities issuance thirty-one

interpretation

In this issuance recommendation letter, unless the context otherwise requires, the following abbreviations and terms have the following meanings: 1. Common term interpretation company, the company, the issuer, refers to Jiangyin Biao Auto Parts Co., Ltd. and Biao Co., Ltd

Flaunting Co., Ltd. refers to Jiangyin flaunting Auto Parts Co., Ltd., the predecessor of the company

Advertised network refers to Jiangyin advertised Network Technology Co., Ltd., the controlling shareholder of the company

Fuerxin consulting refers to Jiangyin fuerxin consulting service enterprise (limited partnership), the shareholder of the company

Flaunting trade refers to Jiangsu flaunting Trade Co., Ltd., the shareholder of the company

Shique investment refers to Shanghai Shique Investment Management Co., Ltd., the shareholder of the company

SAIC Volkswagen refers to SAIC Volkswagen Automobile Co., Ltd

FAW Volkswagen refers to FAW Volkswagen Automobile Co., Ltd

Shanghai Volkswagen powertrain refers to Shanghai Volkswagen powertrain Co., Ltd

Volkswagen FAW engine refers to Volkswagen FAW engine (Dalian) Co., Ltd

SAIC Volkswagen Co., Ltd., FAW Volkswagen Co., Ltd. and Shanghai Volkswagen refer to powertrain Co., Ltd., Volkswagen FAW engine (Dalian) Co., Ltd., SAIC Volkswagen Power Battery Co., Ltd. and Volkswagen automatic transmission (Tianjin) Co., Ltd

SAIC Maxus refers to SAIC Maxus Automobile Co., Ltd

Byd Company Limited(002594) refers to Byd Company Limited(002594) , stock code 002594 SZ

BMW refers to BMW (China) Service Co., Ltd. and its related parties

SAIC GM refers to SAIC General Motors Co., Ltd

ContiTech continental refers to ContiTech group Continental, headquartered in Germany, which is a world-renowned manufacturer in the field of rubber and plastic technology

Hutchinson Hutchinson refers to Hutchinson of Hutchinson group, headquartered in France, which is a world-famous industrial rubber manufacturer

Valeo Valeo refers to Valeo of Valeo group, headquartered in France, which is a world-famous automobile industry group

Company Law refers to the company law of the people's Republic of China

Securities Law refers to the securities law of the people's Republic of China

A share refers to RMB ordinary shares

This offering refers to the issuer's first public offering of RMB common shares (A shares) to the public

CSRC refers to the China Securities Regulatory Commission

Shenzhen Stock Exchange and stock exchange refer to Shenzhen Stock Exchange

Sponsor, recommendation institution, main refers to China Securities Co.Ltd(601066) underwriter, China Securities Co.Ltd(601066) securities

Lawyer of the issuer refers to Beijing Guofeng law firm

The issuer's accountant refers to Dahua Certified Public Accountants (special general partnership)

MIIT refers to the Ministry of industry and information technology of the people's Republic of China

NDRC refers to the national development and Reform Commission of the people's Republic of China

The reporting period refers to 2018, 2019, 2020 and January June 2021

Yuan, 10000 yuan and 100 million yuan refer to RMB yuan, 10000 yuan and 100 million yuan

2、 Interpretation of professional terms

Polyamide (PA) is one of the five general engineering plastics in the world.

Due to its excellent physical and chemical properties such as mechanical strength under high temperature and high pressure, nylon refers to PA, which has become an important raw material for making precision pipes or parts.

On the premise of ensuring the strength and safety performance of the vehicle, reduce the servicing quality of the vehicle lightweight index as much as possible, so as to improve the power of the vehicle, reduce fuel consumption and reduce pollution emissions.

"National five year plan" standard / C5 refers to the National Phase V vehicle pollutant emission standard, which has been implemented nationwide since January 1, 2017.

That is, the motor vehicle pollutant emission standard specified in the light vehicle pollutant emission limits and measurement methods (China phase VI). The "national VI" emission standard is implemented in two stages: National VI (a) "and" national VI (b) ". The Ministry of environmental protection requires the new national six (a) "national six" standard / C6 and national six (b) to be implemented from July 1, 2020 and July 1, 2023, including Beijing Tianjin Hebei, Fenwei plain, Yangtze River Delta, Pearl River Delta Chengdu Chongqing region and other key regions will implement the "national six" emission standard of light vehicle pollutants in advance on July 1, 2019.

Power system connecting pipeline refers to the connecting pipeline used for engine power system in automobile

Cooling system connecting pipeline refers to the connecting pipeline used for automobile cooling system in automobile

Connector refers to the parts and components that realize the connection or disconnection of pipeline system in automobile

Injection molded parts refer to plastic parts formed by plastic injection molding process

Carbon canister connecting pipe (AKF pipe), also known as carbon canister connecting pipe, is applied to the pipeline of the fuel system of the engine and connected with the carbon canister. It is the connecting pipeline product of the company's power system.

Crankcase vent pipe refers to the pipeline applied to the circulation of blow by gas (including fuel steam, oil steam and exhaust gas) in the engine, which is the connecting pipeline product of the company's power system.

Fuel pipe refers to the connection between the bottom oil delivery pipe and the engine, which is the company's power system connection pipeline product.

It is applied to the automobile engine cooling system. The heat generated by the working cooling water pipe of the engine is transferred to the radiator for cooling, to the heater for heating the cockpit, and the cooled coolant is transferred back to the engine.

The utility model relates to a processing method in which raw materials are heated and plasticized while being extruded through the action between the barrel of an extruder and a screw. It refers to a processing method in which the raw materials are pushed forward by the screw and continuously pass through the machine head to make various cross-section products or semi-finished products.

Injection molding refers to the technology that plastic is heated and melted by injection molding machine, then injected into the mold cavity for molding, cooled, solidified and demoulded.

Thermoforming refers to a technology in which nylon tubes are fixed by molds, softened by heating and formed by cooling.

Fixed point letter, also known as Nomination Letter, refers to the written confirmation that the automobile main engine factory selects the designated supplier to provide products for it.

Valve pump and other functional parts refer to the main raw materials of the company's products, including valves, pumps and other basic components used for automotive pipeline fluid control.

Plastic parts refer to the main raw materials of the company's products, including plastic tubing, joints and other plastic products.

Rubber parts refer to the main raw materials of the company's products, including rubber products such as sealing rings and rubber pipes.

Mold refers to the tool used to produce products by injection molding, extrusion, molding, assembly and other process methods.

Vehicle manufacturers and vehicle manufacturers refer to vehicle manufacturers

Passenger car refers to a kind of vehicle classification, which is mainly used to carry people and their luggage and / or occasionally carry goods, including the driver, with a maximum of 9 seats.

Commercial vehicle refers to a kind of vehicle classification, including all trucks and buses with more than 9 seats.

PLM refers to product life cycle management software

Iatf16949 refers to the specific quality system requirements for suppliers in the automotive industry formulated by the international automotive promotion group (IATF) according to ISO9001.

Note: there are differences in the mantissa between the sum of partial totals and individual data in this issuance recommendation letter. These differences are caused by rounding.

Section 1 basic information of this securities issuance

1、 The sponsor representative specifically responsible for the recommendation of this securities issuance

China Securities Co.Ltd(601066) securities designated Jiang Xiao and Fu Xinxiong as the sponsor representatives of this initial public offering.

The practice of the above two sponsor representatives is as follows:

Mr. Jiang Xiao: sponsor representative, master of finance of Shanghai University of Finance and economics, now the director of China Securities Co.Ltd(601066) securities investment banking department. He has presided over or participated in the following projects: Lianming machinery IPO, Ktk Group Co.Ltd(603680) IPO, Zhejiang Shengda Bio-Pharm Co.Ltd(603079) IPO, Jiangsu Leili Motor Corporation Limited(300660) IPO, Zhejiang Tianyu Pharmaceutical Co.Ltd(300702) IPO, Runjian Co.Ltd(002929) IPO, Changzhou Kaidi Electrical Inc(605288) IPO, Yangling Metron New Material Co.Ltd(300861) IPO, Xiamen Bank Co.Ltd(601187) IPO, Anhui Xinke New Materials Co.Ltd(600255) non-public offering, Zhongnong resources non-public offering Jiangnan Mould & Plastic Technology Co.Ltd(000700) non public offering, red bean shares

- Advertisment -